Development platform
Catalogue · Tube · PA-TU-001

Aluminium tube Ø 16 × 100 mm

Print development of a 15 g aluminium tube (internal lacquer, latex ring).

50.3 × 96 mm Market EU Sample
DemoView-only demo.

You see the 50 sample dielines and their sample technical profiles, and can download the PDFs and try the detector. Register as a tester to add profiles, keep detections and add custom dielines.

Shoulder zonePrint areaCrimp / seal zone1. Eye mark (orientation)12. LOT / EXP in crimp23. Shoulder (no text)34. Text reads cap down450.3 mm96 mm
  • Cut
  • Technical reference
Technical profile · sample · view only

Tube · filler orientation

Tube filler with eye-mark orientation

Eye mark, crimp coding and keep-out zones of the tube print.

#ZoneLabelPosition · size (mm)Details
1 Eye mark / register mark Eye mark (orientation) x 35.22 · y 87
5 × 8
  • Colour: Black or dark contrast
  • Content: Filler orientation mark
On the back centre line, inside the crimp zone.
2 Variable data / coding LOT / EXP in crimp x -2.43 · y 88
30 × 4
  • Method: Embossed by the crimp jaws
3 Keep-out / no print Shoulder (no text) x 0 · y 0
50.3 × 3
4 Reading direction Text reads cap down x 8.58 · y 34.5
8 × 20
  • Direction: down
Front text reads from the crimp towards the shoulder.

Coordinates in mm from the top-left corner of the die extent (y downwards), as in the PDF's TrimBox.