Blister carton 2 × 10 tablets

End-loading reverse tuck end carton for two blisters of 10 tablets (blister approx. 105 × 52 mm).

162 × 174.8 mm Market EU ECMA A20.20.03.01 Sample

Cut
Crease / fold

Technical profiles

Downloads

Vector PDF, 1:1. Die lines in the spot colour Dieline, profile zones in non-printing spot colours, on layers.

Code	PA-CT-001
Type	Folding carton
Style	carton_rte
Die extent	162 × 174.8 mm
Parameters	L 55 · W 20 · H 110
Panels	Back, Bottom tuck (closure), Bottom tuck (tongue), Side A, Dust flap (top, Side A), Dust flap (bottom, Side A), Front, Top tuck (closure), Top tuck (tongue), Side B, Dust flap (top, Side B), Dust flap (bottom, Side B), Glue flap

Reconstruction of the standard reverse tuck end style at a typical size for this pack; generated from parameters, not copied from a supplier die.

Technical profile · sample · view only

EU FMD · inkjet coding

EU FMD (Reg. 2016/161): UI + ATD, online TIJ

Serialised EU pack with 2D code and human-readable data printed online by thermal inkjet into an unvarnished window.

#	Zone	Label	Position · size (mm)	Details
1	Serialisation (2D + HRI)	UI: GS1 DataMatrix + HRI	x 21 · y 114.4 42 × 18	Content: GTIN (01) · SN (21) · LOT (10) · EXP (17) Method: Thermal inkjet, 600 dpi Module / x-dim (mm): 0.40 Quiet zone (mm): 1 Code min. 10 × 10 mm. HRI next to the code in the order GTIN/PC, SN, LOT, EXP.
2	Varnish-free area	Unvarnished coding window	x 19 · y 112.4 46 × 22	Method: Knock out varnish and primer Window 2 mm larger than the print area on all sides.
3	Braille	Braille: name + strength	x 92 · y 37.4 45 × 12	Content: Product name and strength Method: Marburg Medium, blind emboss Keep 6 mm from creases and 3 mm from the coding window.
4	Reading direction	Reading direction: top closure up	x 109.5 · y 75.4 10 × 24	Direction: up Front text reads with the top tuck at the top.
5	Glue area	Side seam glue	x 1.5 · y 33.9 9 × 107	Method: Cold glue, 2 lines No ink, no varnish on the glue flap.
6	Glue area	Glue contact (inside of Side B)	x 151.5 · y 34.4 10 × 106	Matching unvarnished strip on the inside of the joint (reverse side).
7	Barcode / Pharmacode	Pharmacode (Laetus)	x 18 · y 38.4 6 × 30	Content: Pharmacode, component ID Module / x-dim (mm): 0.5 / 1.5 Direction: up Bars perpendicular to the machine direction; read on the folder-gluer.
8	Visual edge mark / colour code	Strength colour band	x 142 · y 32.4 20 × 4	Colour: Pantone per strength Band bleeds over the top crease so it is visible on the closed carton.
9	Tamper evidence (ATD)	ATD: seal label position	x 104.5 · y 16.2 20 × 12	Content: PA-LB-009 seal label Method: Applied on cartoner Label bridges the closure and the front panel.

Coordinates in mm from the top-left corner of the die extent (y downwards), as in the PDF's TrimBox.